Skip to content

decode-dsd

Directory actions

More options

Directory actions

More options

Latest commit

 

History

History

decode-dsd

Folders and files

README.md

@audio/decode-dsd npm MIT

Decode DSD (DSF, DFF) audio to PCM float samples.

npm install @audio/decode-dsd

import decode, { decoder } from '@audio/decode-dsd'

DSD is a 1-bit-per-sample sigma-delta stream running at 2.8224 MHz and up ("DSD64", "DSD128", …). Getting to PCM is a low-pass + decimate: a Kaiser-windowed-sinc FIR removes the noise-shaped quantization noise pushed above the audio band, then every Nth sample is kept. The first decimation stage (raw bits → 8× that rate) runs directly on the 1-bit stream using per-byte lookup tables — the classic trick from Sebastian Gesemann's dsd2pcm (BSD), also used by ffmpeg's dsd_lsbf_planar/dsd_msbf decoders; this is an independent implementation of the same idea, not a port. A second, ordinary decimating FIR (on the now multi-bit float stream, much cheaper) reaches 44.1/88.2/176.4 kHz.

let { channelData, sampleRate } = decode(dsfOrDffBytes)

let dec = decoder({ sampleRate: 88200 })
let head = dec.decode(chunk1)   // synchronous; partial blocks carry over
let tail = dec.flush()
dec.free()

Both decode() and decoder() are synchronous — no WASM, no async setup.

Formats

DSF (Sony DSD Stream File): DSD /fmt /data chunks, up to 5.1 channels, DSD64/128/256/512 sample rates, 1-bit LSB-first or MSB-first packing (per the fmt chunk's bitsPerSample field, exactly as the spec defines it), data interleaved in fixed 4096-byte-per-channel blocks. Trailing ID3v2 tag (pointed to by the DSD chunk header) via @audio/decode-dsd/meta.

DFF (Philips DSDIFF): FRM8/FVER/PROP (FS, CHNL, CMPR)/DSD chunks, data interleaved byte-per-channel, always MSB-first. DST-compressed files (CMPR = 'DST ') throw Unsupported: DST — DST is a separate lossless codec, not raw DSD. Edited-master chunks (DIIN/DITI/…) are ignored. A non-standard ID3 chunk, if present, is also readable via @audio/decode-dsd/meta.

API

decode(src, opts?): AudioData

Decode a complete Uint8Array or ArrayBuffer.

decoder(opts?): DSDDecoder

  • dec.decode(data): decode a chunk. DSF needs a full 4096 × channels-byte block group per channel before it can decode anything (that's the container's own interleave unit); DFF only needs one channels-byte frame.
  • dec.flush(): zero-pads a short final block to the container's own frame size (matching the DSF spec's own convention for a partial last block) and decodes it — it does not separately drain the FIR's group-delay tail.
  • dec.free(): release state. Idempotent.
Option Default
sampleRate dsdRate / 32 Output rate. Must equal dsdRate / 8, /16, /32, or /64 (DSD64 → 352.8k / 176.4k / 88.2k / 44.1k) — the byte-lookup-table stage only decimates in whole-byte (8-bit) steps.
cutoff 0.45 Passband edge, as a fraction of the output rate, for whichever stage sets the final rate.
length computed FIR taps for that stage. Longer = closer to the stopband target, slower.
stopband 100 Target stopband attenuation (dB), used to derive the Kaiser β.

AudioData is { channelData: Float32Array[], sampleRate: number }.

DSD's 1-bit ±1 maps directly to PCM full scale — no gain change is applied. SACD material mastered at DSD's nominal "0 dB" can legitimately hit +6 dB relative to PCM full scale; this decoder does not clamp or renormalize, so such material will clip in the Float32 sense (values outside ±1) exactly as it would on any other bit-transparent DSD decoder.

Numbers

  • Bit-domain stage 1 (fixed): 192 taps (96-tap half + symmetry, 12-byte lookup tables), cutoff 0.45×(dsdRate/8), 100 dB target stopband.
  • Stage 2 (built per request): length computed from the Kaiser formula for a truly alias-free transition band (passband edge to the decimation's own mirror point) at the requested stopband.
  • Measured (2nd-order test tone through a properly-synthesized 5th-order 1-bit modulator, test.js): in-band SNR 114–117 dB at 44.1k/88.2k/176.4k (≥ 80 dB required, conservative under the modulator's own ~100+ dB theoretical ceiling — see test.js for the exact citation).
  • Cross-checked against ffmpeg -i x.dsf -f f32le -ar 88200 -: 1 kHz tone amplitude within 0.000 dB, phase within 1.6° after delay alignment, duration exact.
  • Speed: 60 s stereo DSD64 → 88.2 kHz decodes in ≈ 2.1 s (pure JS, single core).

License

ॐ · MIT

Use when: you have raw DSD/SACD-rip material (.dsf/.dff) and need PCM — playback, format conversion, or feeding a conventional DSP chain. Not a DST decoder (DST-compressed DFF throws) and not a DSD encoder.

Part of @audio/decode — the decode family umbrella.

MIT © audiojs