Full screen status incorrect while off but charging on orbic

[ZeroChaos-]

Prerequisites

• I have read CONTRIBUTING.md

Bug Report Details

This is not a duplicate of issue #732

I recently updated to 0.13 and enabled the full screen status feature. I know it flashes and that isn't a concern. The concern is that when the orbic is powered off and charging the status screen improperly shows green. Per the doc I feel it should be white, indicating rayhunter is not running.

This is especially confusing given #732 makes it very hard to see if the device is in fact running or just charging. As such, this is a pretty significant effect on usability.

[untitaker]

Yes I noticed that on other devices too, its much older behavior than 0.13. Rayhunter starts during charging when the device is supposed to be off. I dismissed it as glitch, because surely nobody would think the device is properly recording when it's off. Not a very strong argument I know

I wonder if the "no nas" heuristic triggers and turns the status red in this state.

[cooperq]

This is probably fixed by moving rayhunter higher up the boot chain in init.d, I think that the device only boots up a subset of services while in charging mode and rayhunter is one of those services. The fix would be to figure out what bootmode the device is in when chargin and remove rayhunter from that bootmode in init.d but its not a priority for me.

[ZeroChaos-]

I understand that you feel this is a low priority, but it is extremely difficult to tell that it's in charging mode. The main problem is the green square draws over the charging icon so fast I typically can't see it at all. So it's very difficult to tell if the device is off or on.