Skip to content

About

This is a repository with what I've worked on during my internship at Scipol. It is split into two main projects, one which involves a notebook to create templates for animations on Spacecrafter, the other one involves a code and 3D models for a 3D printable SAT model.

Resources

Stars

0 stars

Watchers

0 watching

Forks

Latest commit

 

History

7 Commits

Folders and files

NameName
Last commit message
Last commit date
 
 
 
 
 
 

Repository files navigation

Scipol_internship

This is a repository with what I've worked on during my internship at Scipol. It is split into two main projects, one which involves a notebook to create templates for animations on Spacecrafter, the other one involves a code and 3D models for a 3D printable SAT model.

The notebook requires multiple libraries such as:

  • pysm3,
  • astropy,
  • healpy,
  • PIL,
  • Scipy,
  • Numpy,
  • Pathlib,
  • imageio.v3 and v2,
  • glob,
  • os

There is also an Animation zip folder attached to it with CMB images and an image of the Atacama Desert. You may need to run the notebook locally because of how big the files are (and to unzip the animation folder.)

There is a guide I have written here to learn how to control the Planetarium itself https://docs.google.com/document/d/1cNGQRUlb51y7VOA4KKrt8LwFBJInOEnrIci8GCJsDR4/edit?usp=sharing

The SAT model section is composed of a .3mf file, a code and an image of the pin map and the system to automatize movement

The code is currently untested because of a lack of electronics, but the list of electronics is:

  • 1 Arduino Nano ESP32
  • 2 NEMA 17 Stepper Motor
  • 2 TMC2209 drivers
  • 2 KW11 
  • 2 Ceramic capacitors (100 nF)
  • 2 Electrolytic capacitors (100 uF)
  • 1 Pololu 5V, 1A Step-Down Voltage Regulator D24V10F5
  • 6 Resistors 1K Ohm 
  • 4 On/Off switches 
  • 1 I2C screen  

About

This is a repository with what I've worked on during my internship at Scipol. It is split into two main projects, one which involves a notebook to create templates for animations on Spacecrafter, the other one involves a code and 3D models for a 3D printable SAT model.

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages