Linux kernel for Unipi PLCs

This repo contains recipes and patches to build Linux kernel for Unipi PLCs and SBC

• Unipi Zulu - mini SBC with NXP i.MX8M Mini
• Unipi Patron - PLC with Unipi Zulu
• Unipi G1 - PLC with Rockchip RK3328 (Not finished yet!)
• Unipi Edge - PLC with Raspberry Pi CM40 (Not finished yet!)

Build is based on Linux v6.12.66-cip16

How to cross-build kernel on Linux host

Required packages - package names are valid for Debian 13

• build-essential
• git
• bison
• flex
• crossbuild-essential-arm64
• libssl-dev
• libncurses-dev
• bc
• wget

Prepare building environment

Load source repo on unipi-kernel and download all required sources

git clone https://github.com/UnipiTechnology/unipi-kernel.git
cd unipi-kernel/
./prepare.sh build

Compile binaries

Use prepared configuration file for Unipi Zulu.

  CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 make unipi-zulu_defconfig

To modifying U-boot building options use menuconfig.

CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 make menuconfig

Build kernel, modules and devicetree binaries

CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 make -j <num_of_proc>

Installation

Create some directory on filesystem for example /i and copy build artifacts there

mkdir /i
CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 make install INSTALL_PATH=/i
CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 make dtbs_install INSTALL_DTBS_PATH=/i
CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 make modules_install INSTALL_MOD_PATH=/i