build(deps): bump jdx/mise-action from 4.1.0 to 4.2.1

[dependabot]

⚠️ Dependabot is rebasing this PR ⚠️

Rebasing might not happen immediately, so don't worry if this takes some time.

Note: if you make any changes to this PR yourself, they will take precedence over the rebase.

---

Bumps jdx/mise-action from 4.1.0 to 4.2.1.

Release notes

Sourced from jdx/mise-action's releases.

v4.2.1: Signed checksums and PATH export fix

A small patch release with two user-facing fixes: mise downloads are now verified against minisign-signed release checksums by default, and the env input no longer leaks the runner's PATH into subsequent steps.

Fixed

Verify mise downloads with signed checksums (#548) by @​jdx

The action now embeds mise's minisign public key and verifies SHASUMS256.txt.minisig before trusting any release checksums, then checks the downloaded mise binary's SHA256 against the verified list. This applies to both GitHub release archives (verified before extraction) and the default mise.jdx.dev CDN path (verified against the signed checksum for the matching release asset). If a CDN download fails verification, the action warns and falls back to the signed GitHub release asset instead of installing an unverified binary.

• The existing sha256 input still works as an explicit override.
• Pinned mise versions older than 2024.12.24 (which predate minisign checksums) get a warning and skip signed verification rather than failing.
• Because tar installs now extract from a verified file on disk, the previous streaming download | tar fast path is replaced with a download-then-verify-then-extract flow.

Thanks to @​potiuk for the detailed threat-model writeup in #547.

Exclude PATH from environment export (#556) by @​jdx

The env input has always documented that "PATH modifications are not part of this", but since the switch to mise env --json in #252 (needed for redaction support), the action was exporting every string value returned by mise — including the computed PATH — into GITHUB_ENV. That effectively snapshotted the runner's entire PATH into subsequent steps and let [env] _.path entries in mise.toml leak past the action's own PATH management.

exportMiseEnv now skips PATH (case-insensitive) when exporting JSON env vars, restoring the documented behavior. Normal mise env vars are still exported, and PATH continues to be managed by the action's own setup (e.g. add_shims_to_path). Fixes #555.

Full Changelog: jdx/mise-action@v4.2.0...v4.2.1

v4.2.0: Bootstrap mode & wget fallback

This release adds an opt-in bootstrap mode for projects that use mise bootstrap, and makes the action work on runner images that ship wget but not curl.

Added

Bootstrap mode (#522) by @​jdx

Three new inputs let the action drive mise bootstrap instead of mise install:

- uses: jdx/mise-action@v4
  with:
    bootstrap: true
    bootstrap_skip: "tools,task"   # comma-separated parts to skip
    bootstrap_args: "--yes"        # extra args forwarded to mise bootstrap

• When bootstrap: true, the action runs mise bootstrap under the existing install gate and sets MISE_EXPERIMENTAL=1 automatically.
• If a repo mise lock file is present, it runs mise --locked bootstrap, matching the auto-lock behavior introduced for mise install in v4.1.0.
• install_args cannot be combined with bootstrap: true — the action fails fast and tells you to use bootstrap_skip / bootstrap_args instead, because full bootstrap doesn't support partial tool install args.
• A new {{bootstrap_hash}} template variable is included in the default cache key (and available in custom cache_key templates) so bootstrap and non-bootstrap configurations don't share caches.

bootstrap_skip relies on mise bootstrap --skip from jdx/mise#10497, so make sure you're on a recent mise version if you use it.

Fixed

• Fall back to wget when curl is unavailable (#521) by @​risu729 — The action used to hard-code curl for fetching the mise binary, tar/zip archives, and the latest VERSION lookup, which broke on minimal runner images that only ship wget. It now prefers curl and transparently falls back to wget, preserving the streaming download | tar fast path for .tar.gz and .tar.zst installs on Linux/macOS. Proxy support is unchanged — both tools honor HTTP_PROXY/HTTPS_PROXY. Addresses jdx/mise#10488.

... (truncated)

Changelog

Sourced from jdx/mise-action's changelog.

Changelog

---

4.2.1 - 2026-07-16

🐛 Bug Fixes

• verify mise downloads with signed checksums (#548) by @​jdx in #548
• exclude PATH from environment export (#556) by @​jdx in #556

🔍 Other Changes

• Enable Entire for Codex (#529) by @​jdx in #529

⚙️ Miscellaneous Tasks

• (ci) automate weekly releases (#557) by @​jdx in #557
• (release) skip ai reviews for release prs (#549) by @​jdx in #549

---

4.2.0 - 2026-06-17

🚀 Features

• support bootstrap mode (#522) by @​jdx in #522

🐛 Bug Fixes

• fall back to wget when curl is unavailable (#521) by @​risu729 in #521

📚 Documentation

• link rust cache issue (#496) by @​risu729 in #496

⚙️ Miscellaneous Tasks

• (ci) fix zizmor version comments (#506) by @​jdx in #506
• (ci) use pr-closer action (#505) by @​jdx in #505

---

4.1.0 - 2026-06-04

🚀 Features

• add wings_enabled input (mise-wings cache integration) (#454) by @​jdx in #454
• lock install when mise.lock is present (#495) by @​zeitlinger in #495

🐛 Bug Fixes

• (ci) add gh auth setup-git to release-plz.sh (#473) by @​jdx in #473

... (truncated)

Commits

• dad1bfd chore: release v4.2.1 (#530)
• 1e7bfbb chore(ci): automate weekly releases (#557)
• b107e20 fix: exclude PATH from environment export (#556)
• d538618 chore(deps): update dependency prettier to v3.9.4 (#553)
• 99eca4c chore(deps): update github/codeql-action action to v4.36.3 (#552)
• 43d01e6 chore(deps): update dependency typescript-eslint to v8.62.1 (#551)
• d44584d chore(deps): update dependency js-yaml to v5.2.1 (#550)
• 4b4b9b2 chore(release): skip ai reviews for release prs (#549)
• 0f03c79 fix: verify mise downloads with signed checksums (#548)
• 6bd511f chore(deps): update dependency js-yaml to v5.2.0 (#546)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

---

^{Need help on this PR? Tag /codesmith with what you need. Autofix is disabled.}

---

Summary by cubic

Update CI to use jdx/mise-action v4.2.1. This adds signed checksum verification for downloads, fixes PATH env export leakage, and improves runner compatibility (wget fallback) with optional bootstrap mode support.

• Dependencies
  • Bump jdx/mise-action from 4.1.0 to 4.2.1 in .github/workflows/ci.yml.

^{Written for commit 005ea9a. Summary will update on new commits.}