Repository navigation

Issues

New issue

Kernel roadmap: slow fillets and booleans, and where to help
#1597 · bherbruck opened on Oct 16, 2026
7
Kernel work is paused while we evaluate a new geometry kernel
#3992 · jyviko opened on Oct 21, 2026
10

Inserted parts often land in the wrong direction: orient fasteners automatically, and allow absolute placement
tangency-labs/solidcraft#12150 · opened on Nov 5, 2026
Sketch: changing 9 dimensions at once is refused although the new sizes fit
tangency-labs/solidcraft#12148 · opened on Nov 5, 2026
1
STEP export: B-spline curves always written with closed_curve and self_intersect .U., also straight 2-point pcurves and closed circles
tangency-labs/solidcraft#12147 · opened on Nov 5, 2026
EXTRUDE: operation failed
tangency-labs/solidcraft#12144 · opened on Nov 4, 2026
1
component.extract refuses a component whose body was moved into or out of it
tangency-labs/solidcraft#12142 · opened on Nov 4, 2026
1
A body with the same name as a body in a linked part makes targets resolve to the wrong body
tangency-labs/solidcraft#12141 · opened on Nov 4, 2026
1
timeline.reorder sometimes reports success but leaves the feature where it was
tangency-labs/solidcraft#12140 · opened on Nov 4, 2026
1
Joint drive recomputes every later feature after a pose-dependent feature
tangency-labs/solidcraft#12139 · opened on Nov 4, 2026
2
CREATE SKETCH: operation failed
tangency-labs/solidcraft#12138 · opened on Nov 4, 2026
1
Interface font: bold and medium text stay light when the chosen font file is a light weight
tangency-labs/solidcraft#12133 · opened on Nov 4, 2026
1
LIP: operation failed on shell feature.
tangency-labs/solidcraft#12132 · opened on Nov 4, 2026
Part: function "thread" seems buggy
tangency-labs/solidcraft#12130 · opened on Nov 4, 2026
2
RECTANGULAR PATTERN: operation failed
tangency-labs/solidcraft#12129 · opened on Nov 4, 2026
1
Chamfer refusal uses fillet wording: "the rolling ball does not fit a face it rolls on"
tangency-labs/solidcraft#12128 · opened on Nov 4, 2026
Chamfer and fillet at 2.49 mm fail with SMLib status 1001 while 2.5 mm works (tangent chain round 2.5 mm corners)
tangency-labs/solidcraft#12127 · opened on Nov 4, 2026
Sweep fails with only "SMLib failed (status 1025)" when the profile is larger than the path's corner radius
tangency-labs/solidcraft#12126 · opened on Nov 4, 2026
Hidden sketch on a body face (automatic face projection) keeps drawing its outline
tangency-labs/solidcraft#12125 · opened on Nov 4, 2026
Create Sketch on a face of a Two Sides extrude cut: "this face can't keep an attachment"
tangency-labs/solidcraft#12124 · opened on Nov 4, 2026
FILLET: operation failed
tangency-labs/solidcraft#12123 · opened on Nov 4, 2026
1
extrude fusion
tangency-labs/solidcraft#12121 · opened on Nov 4, 2026
1
shop drawings
tangency-labs/solidcraft#12119 · opened on Nov 4, 2026
2
Part: Cant make shop drawings
tangency-labs/solidcraft#12118 · opened on Nov 4, 2026
2
Join: a cylinder flush with a thin strap's faces and as wide as the strap fails with "boolean Union: … no result"
tangency-labs/solidcraft#12117 · opened on Nov 4, 2026
1
Pattern: a component pattern doesn't follow its count parameter
tangency-labs/solidcraft#12116 · opened on Nov 4, 2026
2
Pattern: copies of bodies don't get the source body's appearance or material
tangency-labs/solidcraft#12115 · opened on Nov 4, 2026
1